Seismic Isolation System using U-Shaped Steel Damper
G. Jyothi Sri Sravya1, Atulkumar Manchalwar2
1G. Jyothi Sri Sravya, M-Tech Scholar, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad.
2Atulkumar Manchalwar, Associate Professor, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad.
Manuscript received on November 17., 2019. | Revised Manuscript received on November 24 2019. | Manuscript published on 30 November, 2019. | PP: 12336-12339 | Volume-8 Issue-4, November 2019. | Retrieval Number: D8861118419/2019©BEIESP | DOI: 10.35940/ijrte.D8861.118419
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In the present paper base isolation system is analyzed and its seismic behavior is investigated using U-shaped steel dampers as an isolator by placing it at the bottom of the structure. It is the most popular way of protecting the structure using control techniques for earthquake ground motion. The dampers significantly reduced damage factors such as displacement and drift. To reduce structural response to external forces, which can be accomplished through the use of special protective systems. So to prevent these damages, seismic isolation technique can be used for newly constructed structures. The time history analysis of the time domain on this structure is conducted by using SAP2000 software.
Keywords: Isolation, U-shaped damper, Time history Analysis, SAP2000, MDOF.
Scope of the Article: Measurement & Performance Analysis.