Drilling Casing Design using Drilling Software at Well “Well X-01” Field “S”
KRT. Nur Suhascaryo1, Sulistyorini Widi Hastuti2, Eko Suyanto3
1Dr. KRT. Nur Suhascaryo, Faculty of Mineral Technology, UPN “Veteran” Yogyakarta, Yogyakarta, Indonesia.
2Sulistyorini Widi Hastuti, Faculty of Mineral Technology, UPN “Veteran” Yogyakarta, Yogyakarta, Indonesia.
3Eko Suyanto, Drilling & Well Intervention, PT. Pertamina Hulu Rokan Zone 4, Prabumulih, Indonesia.
Manuscript received on 16 July 2023 | Revised Manuscript received on 29 July 2023 | Manuscript Accepted on 15 September 2023 | Manuscript published on 30 September 2023 | PP: 47-51 | Volume-12 Issue-3, September 2023 | Retrieval Number: 100.1/ijrte.C78690912323 | DOI: 10.35940/ijrte.C7869.0912323
Open Access | Editorial and Publishing Policies | Cite | Zenodo | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Well “X-01” is a slant (J-Type) directional well and will be subjected to appropriate and technically qualified drilling casing planning in order to prevent problems such as burst, collapse, and tension that can cause increased internal and external pressure loads experienced by the casing. The methodology used in this research is document study and quantitative analysis in casing planning using Drilling Software by taking into account the loading acting on the casing, which is burst, collapse, tension, biaxial, and triaxial loads. Casing design planning for Well “X-01” is carried out by analyzing the casing setting depth based on PPFG data, considering kick tolerance, then casing planning is carried out using Drilling Software. The results of drilling casing planning inWell “X-01” Field “S” using Drilling Software, five design routes were obtained, that is conductor casing using X-52 casing; 157.5 ppf, surface casing using K-55 casing; 94 ppf, intermediate casing using K-55 casing; 54.5 ppf, kick tolerance 32.55 bbls, production casing using K-55 casing; 40 ppf, kick tolerance 42.1 bbls, and production liner using K-55 casing; 23 ppf, kick tolerance 69.08 bbls. The safety factor of each route met API standards for the durability of the selected casing. In well “X”, casing planning can be a reference in the casing design process stage because optimal and safe results are obtained
Keywords: Total Loss, Kick, Drilling Software
Scope of the Article: Automated Software Design and Synthesis