Optimization of Drilling Parameters on Alkaline Treated Jute fiber Sandwich Material
Sathish Kumar S1, A.V. Suresh2, Nagamadhu M3, Vitala H R4, Dileep B P5
1Sathish Kumar S, Department Mechanical Engineering, Rajiv Gandhi Institute of technology, Bangalore, Karnataka, India.
2A.V. Suresh, Department Mechanical Engineering, B.M.S. Institute of Technology, Bangalore, Karnataka, India.
3Nagamadhu M, Department Mechanical Engineering, Acharya Institute of Technology, Bangalore, Karnataka, India.
4Vitala H R, Department of Mechanical Engineering, SJBIT, Bangalore, Karnataka, India.
5Dileep B P, Department of Mechanical Engineering, Amrita School of Engineering, Bengaluru, Amrita Vishwa Vidyapeetham, India.
Manuscript received on 7 August 2019. | Revised Manuscript received on 14 August 2019. | Manuscript published on 30 September 2019. | PP: 2454-2459 | Volume-8 Issue-3 September 2019 | Retrieval Number: C4693098319/2019©BEIESP | DOI: 10.35940/ijrte.C4693.098319
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The present work efforts to determine CNC drilling performance and optimization of drilling parameters during drilling of treated JFRPPU-foam sandwich structures. In this drilling operation the ensuing process performance structures viz thrust, torque and delamination factor for entry and exit hole have been recognized. The effort has been made to regulate the optimal drilling parameters set. Taguchi method employed for design of experiment. The effects of parameters process such as composite geometry type, feed rate, drill speed, and drill size varied each at three different levels. In this experimentation sandwich structures L27 orthogonal array is used. A nonlinear regression model is measured and formulates the function based on the drilling parameters and fitness function. The result shows the minimization thrust force, delamination of hole drill diameter and feed rate more effect than the speed. TAN coated carbide twist drilled hole gives the result more percentage to reduce the hole wall delamination.
Keywords: ANOVA, CMM, CNC, Taguchi Method and Treated JFRPPU-Foam Sandwich Structures
Scope of the Article: Discrete Optimization