Technology of Production of Technical Belts And The Study of Their Properties
Dilfuza Kadirova1, Askarali Daminov2, Saidvoris Rakhimkhodjaev3
1Dilfuza Kadirova, Department Textile technology, Tashkent Institute of Textile and Light Industry /, City Tashkent, Uzbekistan.
2Askarali Daminov, Department Textile technology, Tashkent Institute of Textile and Light Industry /, City Tashkent, Uzbekistan.
3Saidvoris Rakhimkhodjaev, Department Textile technology, Tashkent Institute of Textile and Light Industry /, City Tashkent, Uzbekistan.
Manuscript received on 2 August 2019. | Revised Manuscript received on 11 August 2019. | Manuscript published on 30 September 2019. | PP: 549-552 | Volume-8 Issue-3 September 2019 | Retrieval Number: B1555078219/19©BEIESP | DOI: 10.35940/ijrte.B1555.098319
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The article developed a method and technology for the production of seamless woven tapes. Defined technological parameters of the developed conveyor tapes. The laws of change in the mass and thickness of the conveyor tape made from the treated fabric, from the grey fabric and non-woven fabric depending on the time of operation are obtained. solved by the fact that the threading of the warp is carried out in the form of a continuous spiral, then the cords and weft yarns are woven into warp yarns the on the loom. Moreover, the length of a section of fabric with non-rubbed yarn and the ratio of the diameter of the cord to the diameter of the weft yarn is at least 1:2. From the graphs, fig.5 and 6, it follows that the exploitationof the conveyor tape made of non-woven fabric is not more than three months, the conveyor tape made of grey fabric is about two years, and the conveyor tape made of treated fabric is three years.Due to the fact that the degree of adherence of the conveyor material in the tape made of grey fabricis lower by 58 % and in the tape made of treated fabric lower by 71% than in the tape made of non-woven fabric. The structure of the grey fabric contains only twisted yarns mutuallyintertwined, and the treated fabric is ultimately water-repellent preparations that reduce the adhesion of the conveyer material to the tape. On the contrary, the structure of the non-woven fabric contains fabric, stitched with twisted threads, which increase the adherence of the conveyor material to the tape.
Index Terms: Weaving, Structure of the Fabric, Woven Belts, Technology, Strength.
Scope of the Article: Behaviour of Structures