Design and Implementation of Cuk Converter for Power Factor Correction of PMBLDC Motor Drive
Amit Tripathi1, Anurag Verma2
1Amit Tripathi, Department of Electronics & Communication Engineering, Noida Institute of Engineering and Technology, (Uttar Pradesh), India.
2Anurag Verma, Department of Electronics & Communication Engineering, Noida Institute of Engineering and Technology, (Uttar Pradesh), India.
Manuscript received on 14 October 2019 | Revised Manuscript received on 23 October 2019 | Manuscript Published on 02 November 2019 | PP: 2181-2193 | Volume-8 Issue-2S11 September 2019 | Retrieval Number: B12330982S1119/2019©BEIESP | DOI: 10.35940/ijrte.B1233.0982S1119
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The present project relates to designing of a cuk converter for improving power factor at AC main supply for the PMBLDC motor. In the work an electronic communication technique is used as the motor requires a distortion less controlled DC voltage served to Voltage Source Inverter. The main reason to implement the project is to achieve betterment in the performance of the motor. The work overcomes the problems associated with less power factor of AC main supply. The project helps in eliminating current harmonics generally appears at source input supply by employing a closed loop procedure. A converter called cuk converter and DBR are used for DC to DC and for AC to DC conversion respectively. The analysis of power quality is observed by using a software MATLAB/Simulink and implementation on hardware is also done to verify the analysis.
Keywords: Permanent Magnet Brush Less DC (PMBLDC motor), Cuk converter, V.S.I, Diode Bridge Rectifier (DBR).
Scope of the Article: Low-power design