A System for Detection of Overhead Distribution Line Fault
Anjali Gupta1, Amit Tripathi2
1Anjali Gupta, Department of Electrical & Electronics Engineering, Noida Institute of Engineering and Technology, (Uttar Pradesh), India.
2Amit Tripathi, Department of Electrical & Electronics Engineering, Noida Institute of Engineering and Technology, (Uttar Pradesh), India.
Manuscript received on 14 October 2019 | Revised Manuscript received on 23 October 2019 | Manuscript Published on 02 November 2019 | PP: 2166-2169 | Volume-8 Issue-2S11 September 2019 | Retrieval Number: B12290982S1119/2019©BEIESP | DOI: 10.35940/ijrte.B1229.0982S1119
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The presented paper is related to fault detection of an overhead distribution line. The fault is detected by the installation of device at homes or any other buildings when occurs on overhead distribution lines. Correspondingly the signal is received by the substation coming from the homes and switch off the line when fault is detected. A system model is developed which is working in good situation. Radio frequency technique for communication is used in the system.
Keywords: Substation, Home, Transformer, Relays, Circuit Breaker, Radio Frequency Communication.
Scope of the Article: On-Line And Streaming Algorithms