Designing and Optimising the Parameters of Micro Channels
Rajesh Pant1, Jasmeet Kalra2, Pankaj Negi3, Vijay Kumar4
1Rajesh Pant, Assistant Professor, Department of Mechanical Engineering, Graphic Era Hill University, Dehradun (Uttarakhand), India.
2Jasmeet Kalra, Assistant Professor, Department of Mechanical Engineering, Graphic Era Hill University, Dehradun (Uttarakhand), India.
3Pankaj Negi, Research Scholar, Department of Mechanical Engineering, Graphic Era Deemed to Be University, Dehradun (Uttarakhand), India.
4Vijay Kumar, Assistant Professor, Department of Mechanical Engineering, Graphic Era Hill University, Dehradun (Uttarakhand), India.
Manuscript received on 16 June 2019 | Revised Manuscript received on 23 June 2019 | Manuscript Published on 01 July 2020 | PP: 71-76 | Volume-8 Issue-2S12 September 2019 | Retrieval Number: B10130982S1219/2020©BEIESP | DOI: 10.35940/ijrte.B1013.0982S1219
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper documents the optimization of different parameters of micro channel heat sink which enhance the heat transfer. The objective is to find the major thermal resistance in micro channel and its effect on other parameters. Water is used as a coolant and the initial values of convective heat transfer coefficient and volume flow rate are 30000 W/m2K and 1 lpm respectively. Different graph are plotted between pressure drop,heat transfer co-efficient, pressure drop,thermal resistance and flow rate to finally achieve the optimized valus of channel width and height, hydraulic diameter, thermal resistance and pressure drop. The result achieved are in good agreement with the previous researches.
Keywords: Micro Channels, Heat Sink, MCC.
Scope of the Article: Heat Transfer