Comparative Study between Analytical and Theo-retical Retrofitting of RC Beam with Different Resins Bonded CFRP Laminates
K.Mohan Das1, K Baskar2, C.Selinravi Kumar3, B.Karthik Chary4

1K.Mohan Das*, Professor, Department of Civil Engineering, CMR Col-lege of Engineering and, Medchal, Hyderabad (Telangana), India.
2K Baskar, Professor, Department of Civil Engineering, CMR college of engineering and, Medchal, Hyderabad (Telangana), India.
3C.Selinravi Kumar, Associate Professor, Department of Civil Engineer-ing, Malla Reddy Engineering College, Medchal, Hyderabad (Telangana), India.
4B.Karthik Chary, Assistant Professor, Department of Civil Engineer-ing, CMR college of engineering and, Medchal, Hyderabad (Telangana), India.

Manuscript received on March 11, 2021. | Revised Manuscript received on April 30, 2021. | Manuscript published on May 30, 2021. | PP: 30-38 | Volume-10 Issue-1, May 2021. | Retrieval Number: 100.1/ijrte.A56900510121 | DOI: 10.35940/ijrte.A5690.0510121
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This thesis details experimental work and fi-nite part simulation of concrete beams retrofitted with carbon fiber strengthened compound (CFRP).The objectives of this study were to analyze the behavior of retrofitted beams to develop fi-nite part model describing the beams, supportive the fi-nite part model against the experimental results and eventual-ly investigation the influence of chemical compound resins(GP, ISO, Epoxy) on the sweetening of strengthening of retrofitted beams. The experimental results square measure performed to analyze the behavior of beams designed in such approach that either flexural or shear are going to be expected. The beams rectangle measure loaded at exploitation 2 pur-pose bending till cracks square measure developed. The beams were then blank and retrofitted with CFRP. Finally the beams were loaded till failure. The ANSYS program is employed to de-velop finite part models for simulation of behavior of beams. 
Keywords: CFRP, ANSYS.