Changes in the Uneven Indexes of Sliver and Threads by Different Technological Processes
M.R.Atanafasov1, T.A.Ochilov2, R.X.Norboev3, M.A.Mansurova4, D.A.Khalmatov5
1Assistent Atanafasov Muxiddin Raxmonovich, Faculty Technology of light industry and Design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
2Prof. Ochilov Tulkin Ashurovich, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Uzbekistan
3Prof. Nurbayev Rashit Xudayberdiyevich, Faculty of textile and leather industry, Bukhara engineering technological institute, Uzbekistan
4Prof. Mansurova Munisa Anvarovna, Faculty Technology of light industry and Design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
5Prof. Khalmatov Davronbek Abdalimovich, The faculty of technology of printing, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
Manuscript received on May 02, 2020. | Revised Manuscript received on May 21, 2020. | Manuscript published on May 30, 2020. | PP: 2809-2812 | Volume-9 Issue-1, May 2020. | Retrieval Number: A2274059120/2020©BEIESP | DOI: 10.35940/ijrte.A2274.059120
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The article describes information about textile yarn with texture 20.0, which was obtained from the cotton yarn samples in the laboratory of “Spinning Technology” of the Tashkent Institute of Textile and Light Industry at the cotton processing plant in Akkurgan district of Tashkent region. Worked out in three different options, firstly, raw cotton was converted into fiber in the laboratory of the mill, and the quality indicators of the obtained sliver, wick and thread were studied in the modern equipment of the Uster Tester-5 in the Enterprise” Shovot tex”, and were also studied the physic-mechanical properties of the threads in the laboratory” CentexUz” and proposed an optimal variant of the technological process for release.
Keywords: Thickness, durability, uniformity, ripeness, hollowness, rope irregularity, linear and quadratic inequality.
Scope of the Article: Design and Diagnosis