Effect of Perforation Shapes on the Heat Transfer Characteristic of Perforated Fins
Chandra Kumar Dubey1, Anand Kumar Singh2, Shailendra Sinha3
1Chandra Kumar Dubey, B.Tech (Mechanical) from Babu Banarasi Das Northern India Institute of Technology, Lucknow.
2Anand Kumar Singh, Assistant Professor of Mechanical Engineering at Institute of Engineering & Technology (IET), Lucknow.
3Shailendra Sinha, Professor of Mechanical engineering at Institute of Enginering & Technology (IET), Lucknow.
Manuscript received on November 15, 2019. | Revised Manuscript received on November 23, 2019. | Manuscript published on November 30, 2019. | PP: 1394-1400 | Volume-8 Issue-4, November 2019. | Retrieval Number: D7354118419/2019©BEIESP | DOI: 10.35940/ijrte.D7354.118419
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: A large number of engineering applications required rapid heat dissipation from its surface. This is achieved by the use of the fins i.e. increasing the surface area. Enhancement of heat transfer and reduction in the weight is the major criteria for designing the fins. The main objective of this project is to enhance the heat transfer through the use of perforated fin. A large number of study have been conducted on shape modification by cutting some material from fins to make holes, cavity, slots, groves or channel through the fin body to increase flow area. A rectangular fin of dimension 100 mm. x 200 mm. x 2 mm. and area of perforation is 100 mm2 was selected. The number of perforation was varied from 20, 28, 36 and 44. It was found that maximum temperature drop occurred with 44 perforations. With the same fin with 44 perforation, temperature drop and heat transfer was analysed for different shapes (circular, square, oriented square, pentagon and elliptical) of perforation. I was found that in case of different shape of perforation with same cross sectional area, weight is nearly reduced by 28.42 % for elliptical perforation (a/b>3) was most effective in which 32.20 % more temperature drop and maximum average heat flux as compared to other perforation shape.
Keywords: FEM, Heat Transfer, Perforated Fin.
Scope of the Article: Energy Harvesting and Transfer for Wireless Sensor Networks.