The Effect of Acid Treatment on the Limestone for Calcium Looping Process
N. F. Afandi1, M. Amirul Mustaqim2, Abreeza Manap3, R. Adawiyah Zainuddin4, N. F. Kadir5
1N. F. Afandi, College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor, Malaysia; Institute of Sustainable Energy (ISE), Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor, Malaysia.
2M. Amirul Mustaqim, College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor, Malaysia.
3Abreeza Manap, College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor, Malaysia; Institute of Sustainable Energy (ISE), Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor, Malaysia.
4R. Adawiyah Zainuddin, Uniten R&D Sdn Bhd, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor, Malaysia.
5N. F. Kadir, Uniten R&D Sdn Bhd, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor, Malaysia.
Manuscript received on November 20, 2019. | Revised Manuscript received on November 28, 2019. | Manuscript published on 30 November, 2019. | PP: 6480-6483 | Volume-8 Issue-4, November 2019. | Retrieval Number: D5161118419/2019©BEIESP | DOI: 10.35940/ijrte.D5161.118419
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Calcium Looping Process (CLP) is one of the carbon capturing technology, in which the sorbent material, CaO is absorbing CO2 from flue gases in power plant. However, good sorbent material have been facing several drawbacks such as low generability, and low absorption capacity. Acid treatment can improve the physical properties such as surface area of the sorbent material. This study was aim to synthesize and investigate the effect of acid treatment on the limestone as sorbent material using mixing method in order to maximize the CO2 carrying capacity. The amount of 0 ml, 2 ml, 4 ml, 6 ml, 8 ml and 10 ml of oxalic acid were varied in this study. The result demonstrated that 6 ml of oxalic acid produces highest hardness and high surface area and pore volume size, which favorable to be used as sorbent material in CLP process.
Keywords: Process and Workflow Management.
Scope of the Article: Wireless Power Transmission.