Evaluation of Transient Response of Different Earthing Configurations due to Lightning Impulses
L. M. Wai1, M. S. Abd Rahman2, A. Mohd Ariffin3, N. H. Nik Ali4, M. Osman5, M. Z. A. Ab Kadir6
1L. M. Wai, College of Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, Selangor, Malaysia.
2M. S. Abd Rahman, Institute of Power Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, Selangor, Malaysia.
3A. Mohd Ariffin, Institute of Power Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, Selangor, Malaysia.
4N. H. Nik Ali, Institute of Power Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, Selangor, Malaysia.
5M. Osman, Institute of Power Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, Selangor, Malaysia.
6M. Z. A. Ab Kadir Institute of Power Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, Selangor, Malaysia.
Manuscript received on November 12, 2019. | Revised Manuscript received on November 25, 2019. | Manuscript published on 30 November, 2019. | PP: 6342-6338 | Volume-8 Issue-4, November 2019. | Retrieval Number: D5118118419/2019©BEIESP | DOI: 10.35940/ijrte.D5118.118419
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Solar energy has been a basic need since aware of the energy crises throughout the world. Now the researchers are turning toward solar photovoltaic (PV) power system for future energy needs. However, some drawbacks of the field testing are existing with photovoltaic modules such as cost and heavy dependence on the weather conditions. The problems associated with photovoltaic system are the non-linear supply of power and it leads to complexity in matching the load. The PV solar module produce the nonlinear that changes with the variation in solar irradiance during entire day. Research work is on improving the performance, quality and reducing its cost. Researchers face the challenges in fabrication and materials used and due to this fact its performance decreases. In this paper, a method has been introduced to locate shunts using thermal images. IR inspection is used to observe the location of such shunts. After the electrical testing and measurements of the characteristics, the effect on degradation on solar cell materials from light IV curves and dark IV curves has been depicted. The shunts are isolated and performance is tested again and compare to observe.
Keywords: Edge Etching, IR Camera, Hot Spot, Thermography in Solar Cell Abbreviations: PDMS, Poly dimethylsiloxane; IR, Infra-Red; ITO, Indium Tin Oxide; PV, Photovoltaic.
Scope of the Article: Performance Evaluation of Networks.