Aluminium Metal Matrix Composition with Reinforcement Particles of Tungsten Carbide and Graphite
Shivashankar R1, G V Naveen Prakash2, K B Vinay3
1Shivashankar R, Department of Mechanical Engineering, Vidyavardhaka College of Engineering University, Mysore (Karnataka), India.
2Dr. G. V Naveen Prakash, Department of Mechanical Engineering, Vidyavardhaka College of Engineering University, Mysore (Karnataka), India.
3Dr. K B Vinay, Department of Mechanical Engineering, Vidyavardhaka College of Engineering University, Mysore (Karnataka), India.
Manuscript received on 19 January 2020 | Revised Manuscript received on 02 February 2020 | Manuscript Published on 05 February 2020 | PP: 184-188 | Volume-8 Issue-4S5 December 2019 | Retrieval Number: D10441284S519/2019©BEIESP | DOI: 10.35940/ijrte.D1044.1284S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Aluminium Metal Matrix composition were used in application of the aerospace and automobiles because of its strength and stiffness. Although tribological characteristics of the materials like wear resistance is low. Many research has been carried out in the particle reinforcement with the Aluminium Metal Matrix. In this paper, the several reinforced particles with the aluminium matrix were reviewed. The reinforced materials like Tungsten carbide, graphite or hybrid reinforced materials were analyzed. The stir casting process is the common technique to fabricate these materials. The reinforcement of graphite particles in aluminium materials were shows the considerable mechanical properties.
Keywords: Aluminium Metal Matrix Composition, Graphite, Hybrid Reinforced Materials, Stir Casting Process, Tribological Characteristics and Tungsten Carbide.
Scope of the Article: Metallurgy