Optimization of the Control Scope of the Technical Means of the Vessel during Assessment of its Readiness for Sailing in Ice Conditions
Anisimov A. N.1, Razvozov S. Yu.2, Menshikov V. I.3
1Anisimov A. N., Admiral Makarov State University of Maritime and Inland Shipping, Russia, Saint-Petersburg, Dvin-skaya St.
2Razvozov S. Yu., Admiral Makarov State University of Maritime and Inland Shipping, Russia, Saint-Petersburg, Dvin-skaya St.
3Menshikov V. I., Admiral Makarov State University of Maritime and Inland Shipping, Russia, Saint-Petersburg, Dvin-skaya St.
Manuscript received on 28 September 2019 | Revised Manuscript received on 07 October 2019 | Manuscript Published on 22 October 2019 | PP: 308-311 | Volume-8 Issue-3S October 2019 | Retrieval Number: C10681083S19/2019©BEIESP | DOI: 10.35940/ijrte.C1068.1083S19
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The task of optimizing the procedure for monitoring the technical means of a vessel preparing to sail in ice conditions is being considered, and the control procedure model is being drawn up for a system that includes a certain final number of technical means, that should be operational throughout the upcoming voyage, ensuring the safe operation of the vessel. It is proposed to search for a variety of vessel’s technical means, the verification of which maximizes the probability of trouble-free operation of the vessel as a whole by the time of the end of the control operation, with the limitation from above for the time of control. In addition, it is shown that it is possible to obtain a sequence of elementary checks, which will meet the condition of the maximum probability of failure of the system of technical means at the time of its shutdown. A targeted function that can be found by dynamic programming in the form of a n-step process and further.
Keywords: Vessel, Optimization of Technical Control, State of Readiness For Swimming, Ice Conditions.
Scope of the Article: Discrete Optimization