Implementation of AMBA Based AHB2APB Bridge
Bhagvati Panchal1, Yogesh Parmar2, Haresh Suthar3
1Bhagvati Panchal, 1Department of ECE, Parul Institute of Technology, Limada, Vadodara, Gujarat, India.
2Yogesh Parmar, Asst. Prof., Department. of ECE, Parul Institute of Technology, Limda, Vadodara, Gujarat, India.
3Haresh Suthar,Head of Department,ECE, Parul Institute of Technology,Limda, Vadodara, Gujarat, India.
Manuscript received on February 02, 2020. | Revised Manuscript received on February 10, 2020. | Manuscript published on March 30, 2020. | PP: 1033-1037 | Volume-8 Issue-6, March 2020. | Retrieval Number: E6908018520/2020©BEIESP | DOI: 10.35940/ijrte.E6908.038620
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The Advance Micro controller Bus Architecture bus protocol is used to build high performance SoC designs (system on chip). This achieves communication through the connection of different functional blocks ( or IP ). By using multiple controllers and peripherals, it makes possible to develop multiprocessor unit. It provides reusability of IP of different buses of AMBA, which can reduce the communication gap between high performance buses and low speed buses. To perform high-speed pipelined data transfers, AMBA based embedded system becomes a demanding hypothesis analytical wise, by using different bus signals supported by AMBA. To synthesize as well as simulate the composite annexation which connects advance high performance bus and advance peripheral bus which known as AHB2APB Bridge in addition to no data loss during transfer is the main target of this work. Implementation of bridge module is designed in Verilog HDL and functional and timing simulation of bridge module are done on a platform of Xilinx.
Keywords: Pipelined Data, SOC, Synthesis, Simulation, Verilog HDL, Handshaking Signal, AMBA.
Scope of the Article: IoT Application and Communication Protocol.