Design of Programmable Inductive Voltage Divider using Minimum Inductive Elements
A. Eliwa Gad1, M. Helmy A. Raouf2, A. A. Ammar3
1A. Eliwa Gad, Department of Electrical Quantities Metrology, National Institute of Standards (NIS), Giza, Egypt.
2M. Helmy A. Raouf, Department of Electrical Quantities Metrology, National Institute of Standards (NIS), Giza, Egypt.
3A. A. Ammar, Department of Electrical Engineering, Al-Azhar University, Cairo, Egypt.
Manuscript received on July 14, 2020. | Revised Manuscript received on July 20, 2020. | Manuscript published on July 30, 2020. | PP: 897-901 | Volume-9 Issue-2, July 2020. | Retrieval Number: B3930079220/2020©BEIESP | DOI: 10.35940/ijrte.B3930.079220
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In this paper, a proposed inductive voltage divider is described to be operated manually and automatically, which is not provided by the ordinary decade inductive voltage dividers. Design of that programmable inductive voltage divider (PIVD) is investigated and presented in detail. The introduced PIVD mainly consists of inductive elements, relays, microcontroller to get the required output voltage ratios through its three stages. This PIVD is designed to produce 999 steps in the range from 1×10-3 to 999×10-3 output ratios using minimum inductive elements and reed relays. Simulation of this PIVD has been performed and illustrated as well as practical design components are discussed in detail.
Keywords: Programmable Inductive Voltage Divider; Reed Relays; Simulation; Microcontroller; Voltage Ratio.