Harmonic Reduction using Three-Phase IGBT Based Detuned Filter in Grid connected PV System
K.Bharathi1, M.Sasikumar2
1K.Bharathi*, Electrical and Electronics Engineering Department, Jeppiaar Engineering College, Tamil Nadu, India
2M.Sasikumar, Electrical and Electronics Engineering Department, Jeppiaar Engineering College, Tamil Nadu, India.
Manuscript received on April 02, 2020. | Revised Manuscript received on April 15, 2020. | Manuscript published on May 30, 2020. | PP: 34-38 | Volume-9 Issue-1, May 2020. | Retrieval Number: F9273038620/2020©BEIESP | DOI: 10.35940/ijrte.F9273.059120
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: As the energy consumption is steeply increasing globally, alternate methods must be adopted to meet the demands. Also to preserve the conventional resources, energy production by renewable sources such as solar, wind, geothermal, tidal, etc is the need of the hour. Energy generation through solar cells can be largely used. But, the harmonic content in the power generated from the solar panels are seemingly higher than the maximum allowable limits. Harmonics are the deviation in the output value from the actual value, caused due to various phenomenal factors. We have observed that the harmonics in the output power from the photo-voltaic cells is way to larger than the limited value. So, we have proposed a three-phase shunt connected IGBT based detuned filtering system to limit the harmonic levels within the desired values. To reduce the current THD value below the permissible limits as specified by the IEEE standards and also to maintain voltage regulation and power factor correction, as well as to improve the efficiency of the entire system.
Keywords: Detuned filter, Harmonics, Total Harmonic Distortion (THD).