Six Transistor Carbon Nanotube Field Effect Transistors Based RAM Design and Hardware Description Language Code Development
S. Tamil Selvan1, M. Sundararajan2
1S. Tamil Selvan, Research Scholar, Bharath Institute of Higher Education & Research, Chennai (Tamil Nadu), India.
2Dr. M. Sundararajan, Dean-Research, Bharath Institute of Higher Education & Research, Chennai (Tamil Nadu), India.
Manuscript received on 14 July 2019 | Revised Manuscript received on 10 August 2019 | Manuscript Published on 29 August 2019 | PP: 124-131 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10270682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1027.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The goal of this thesis is to develop carbon nanotube field effect transistors (CNFETs) based static random-access memory (SRAM) and implement it into a Very-highspeed integrated circuit Hardware Description Language Analog and Mixed-Signal (VHDLAMS). To achieve this objective, a compact model of the transistor known as enhancementmode MOSFET-like SWCNT-CNFET is used. This circuit-compatible model of CNFET is described using VHDL-AMS and tested for basic electrical characteristics. This model is valid for CNFETs with channel lengths greater than 20 nm. Based on the CNFETs a new SRAM is designed, and implemented in VHDL-AMS. The performance of the proposed SRAM cell is investigated and compared with SRAMs from conventional metal-oxide semiconductor field effect transistors (MOSFETs). The effect of substrate biasing a CNFET is also demonstrated and implemented in designing the SRAM cell. The VHDL-AMS codes of the CNFET and the SRAM are simulated in software known as Ansoft Simplorer. The compact model of the CNFET is organized hierarchically in three main levels. The first level models the intrinsic channel just beneath the gate of the transistor. The second level builds upon the first level and models the doped source and drain regions of the CNFET. The last level represents the complete trans-capacitance model of the transistor and accounts for multiple CNTs. The proposed SRAM cell is composed of four CNFETs and two load resistors. The driver CNFETs of the proposed SRAM cell are substrate biased. Besides, 8-bit complete SRAM architecture based on this cell is indicated. The performance analysis of the SRAM shows that it has better writing and reading speed as well as better stability when compared with SRAM from conventional MOSFETs. Specifically, the newly proposed SRAM cell has read time of twenty five pico seconds, write time of twenty pico seconds and can tolerate a noise of 120 mV at 32 nm node technology.
Keywords: SRAM, 3 VL, CNTFET, CMOS, Low Power, Highly Stable.
Scope of the Article: Recent Trends & Developments in Computer Networks