Design and Implementation of a Novel Microstrip Filter
G. T. Bharathy1, S. Bhavanisankari2, T. Tamilselvi3, G. Bhargavi4
1G. T. Bharathy, Department of Electronics and Communication Engineering, Jerusalem College of Engineering, Chennai (Tamil Nadu), India.
2S. Bhavanisankari, Department of Electronics and Communication Engineering, Jerusalem College of Engineering, Chennai (Tamil Nadu), India.
3T. Tamilselvi, Department of Electronics and Communication Engineering, Jerusalem College of Engineering, Chennai (Tamil Nadu), India.
4G. Bhargavi, Department of Electronics and Communication Engineering, Jerusalem College of Engineering, Chennai (Tamil Nadu), India.
Manuscript received on 13 July 2019 | Revised Manuscript received on 09 August 2019 | Manuscript Published on 29 August 2019 | PP: 43-46 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10100682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1010.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Microwave filters are circuits which perform signal processing functions, particularly to eliminate unwanted frequency components from the signal, to enhance wanted ones, or both. Electronic filters can be passive or active(depends on components used) Analog or digital(depends on input signal) High-pass, Low-pass, Band-pass, Band-stop or all other pass (depends on frequency) Infinite impulse response (IIR type) or Finite impulse response (FIR type) (Depends on response) Microstrip is a type of electrical transmission line which can be fabricated using printed circuit board technology, and is used to convey microwave frequency signals. Microwave components such as antennas, couplers, filters, power dividers etc can be formed using microstrip line. This paper aims on filter design, using microstrip transmission line, with a Non-Periodic technique especially using Defected Microstrip Structure to be operated in the C – Band frequency.
Keywords: Microstrip Filter, Defected Microstrip Structure, T – Shaped Structure.
Scope of the Article: Microstrip Antenna Design and Application