Microcontroller Based Multichannel Data Acquisition System using LabVIEW
Md. Abdullah Al Mamun1, Md. Atiar Rahman2, Sabiha Sattar3, Mohaimina Begum4
1Md. Abdullah Al Mamun, Electronics Division, Atomic Energy Centre Dhaka, 4 Kazi Nazrul Islam Avenue, Shahbag, Dhaka-1000, Bangladesh
2Md. Atiar Rahman, Electronics Division, Atomic Energy Centre Dhaka, 4 Kazi Nazrul Islam Avenue, Shahbag, Dhaka-1000, Bangladesh
3Sabiha Sattar, Electronics Division, Atomic Energy Centre Dhaka, 4 Kazi Nazrul Islam Avenue, Shahbag, Dhaka-1000, Bangladesh
4Mohaimina Begum, Electronics Division, Atomic Energy Centre Dhaka, 4 Kazi Nazrul Islam Avenue, Shahbag, Dhaka-1000, Bangladesh
Manuscript received on 22 March 2019 | Revised Manuscript received on 26 March 2019 | Manuscript published on 30 July 2019 | PP: 6538-6543 | Volume-8 Issue-2, July 2019 | Retrieval Number: B3173078219/19©BEIESP | DOI: 10.35940/ijrte.B3173.078219
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Microcontroller based Multichannel Data acquisition system (DAS) using LabVIEW is presented. This system is facilitated by using the built-in 10-bit ADCs and digital I/Os of the microcontroller. In a typical setup for analogue voltage measurement, under program control, this system keeps on monitoring the voltage on analogue inputs and makes the digital equivalent and transfer to PC through USB port. It also allows to read digital inputs and to write digital outputs under program control by PC. The controlling program on PC was developed by LabVIEW which is used to read this input at pre-decided time intervals. The controlling program reads these values and process accordingly. Microcontroller programs are also developed and tested successfully. The DAS was successfully used to monitor analog voltage during the laboratory experiments. It is also used for reading data from a temperature sensor. The results reveal that the DAS is suitable and easy method for real time data acquisition. It is expected that this developed system may contribute in the field of automation.
Index Terms: Data Acquisition System (DAS), LabVIEW, Microcontroller, PC.
Scope of the Article: Logic, Functional programming and Microcontrollers for IoT