Getting Graft Cellulose Copolymers and Acrylic Monomers
Rafikov A.S.1, Nabiev N.D.2, Karimov S.Kh.3, Ibodulloev B.Sh.4, Mirzayev N.B.5
1Prof. Adham Salimovich Rafikov, Department of Chemistry, Faculty Technology of the textile industry, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
2Assistant Nabiyev Nabijon Doniyorovich, Department of Chemical technology, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
3Assoc. Prof. Karimov Sardorbek Khojiboyevich, Department of Chemistry, Faculty Technology of the textile industry, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
4Master Ibodulloev Bekzod Shuhratovich, Department of Chemical technology, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
5Assoc. Prof. Nodir Baxodirovich Mirzayev, Department of Technology and design of leather goods, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
Manuscript received on November 15, 2019. | Revised Manuscript received on November 23, 2019. | Manuscript published on November 30, 2019. | PP: 719-723 | Volume-8 Issue-4, November 2019. | Retrieval Number: D6816118419/2019©BEIESP | DOI: 10.35940/ijrte.D6816.118419
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Graft copolymers of acrylic monomers with cotton cellulose were obtained. The dependence of the degree and efficiency of grafting of acrylic acid and methyl methacrylate to cellulose on the concentration of monomer and initiator was investigated. Pre-adsorption of the initiator in the macromolecules of cellulose leads to an increase in the efficiency of the grafting. The efficiency of grafting is higher in those systems in which the initiator used is insoluble in the monomer solvent. Absorption of cellulose with an aqueous solution of the initiator – potassium persulfate, followed by removal of water was done. The advantage of using a water-soluble initiator is that during subsequent processing with a solution of monomer in an organic solvent, the desorption of the active centers does not occur. An increase in the concentration of theinitiator leads to an increase in the degree of grafting, a slight increase in the efficiency of the grafting, a significant decrease in the degree of polymerization and the molecular weight of the graft chains. In a heterogeneous process, an increase in the efficiency of grafting with an increase in the concentration of theinitiator is promoted by the additional adsorption interaction of the initiator molecules with the surface of cellulose. With an increase in the concentration of monomers, the overall degree of conversion slightly increases, the efficiency of grafting slightly decreases, the degree of grafting and the molecular weight of the graft chains increase significantly. The mechanism of graft copolymerization was investigated by comparative analysis of the IR and PMR spectra of cellulose, potassium persulfate, acrylic monomers and products of their interaction. Due to the results of spectroscopic studies, a scheme of graft copolymerization reactions has been proposed. The active centers of graft copolymerization are formed as a result of the reductive interaction of potassium persulfate, water and cellulose macromolecules.
Keywords: Cellulose, Graft Copolymerization, Acrylic Monomer, Initiator.
Scope of the Article: Cyber Physical Systems (CPS).