Determination of the Quality Characteristics of Fibers Obtained From Mulberry Bark
S. U. Patxullayev1, N. M. Islambekova2, M. Kulmetov3, T. A. Ochilov4, Z. F. Valieva5
1Sarvarjon Patxullayev Ubaydullaog’li, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
2Dr. Nigora Murtozaevna Islambekova, Department of “Technology of silk”, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
3Prof. Mirpolat Kulmetov, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
4Prof. Ochilov Tulkin Ashurovich, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
5Valieva Zulfiya Fahritdinovna, Faculty Technology of light industry and design, Tashkent Institute of Textile and Light Industry, Uzbekistan,
Manuscript received on January 02, 2020. | Revised Manuscript received on January 15, 2020. | Manuscript published on January 30, 2020. | PP: 5-8| Volume-8 Issue-5, January 2020. | Retrieval Number: E6648018520/2020©BEIESP | DOI: 10.35940/ijrte.E6648.018520
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This article presents and analyzes the indicators of the length, breaking load, fineness, elongation at break in a group of fibers of natural origin, such as cotton, silk, wool, as well as a comparative characteristic of crimp indices per 1 cm, components of the total deformation of fibers obtained from different parts of silkworm branches
Keywords: fibers, breaking load, elongation at break, cotton, silk, wool, length, diameter
Scope of the Article: Fibers