Measurement Accuracy Assessment for Laser Triangulation 3D Scanning Machine
Khairul Azri Azlan1, Mohammad Rafi Omar2, Mohamed Saiful Firdaus Hussin3, Muhammad Ilman Hakimi Chua Abdullah4, Eswaran S. Chinniah5
1Khairul Azri Azlan*, Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.
2Mohammad Rafi Omar, Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.
3Mohamed Saiful Firdaus Hussin, Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.
4Ilman Hakimi Chua Abdullah,, Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.
5Eswaran S. Chinniah, Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.
Manuscript received on March 12, 2020. | Revised Manuscript received on March 25, 2020. | Manuscript published on March 30, 2020. | PP: 2789-2793 | Volume-8 Issue-6, March 2020. | Retrieval Number: F8394038620/2020©BEIESP | DOI: 10.35940/ijrte.F8394.038620
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Laser triangulation 3D scanning machine is one of many types of 3D scanning technologies that are currently available in the current market. It is mainly use to capture object profiles as well as for measurement. Therefore, the measurement accuracy of laser triangulation 3D scanner was assessed and presented in paper. Three solid aluminum calibration block with known dimensions were fabricated by using CNC machine and these samples were named based on its profiles which are round, square and complex. Besides the laser triangulation 3D scanning machine, two more measuring equipment which are Vernier caliper and coordinate measuring machine were used as benchmarks. Three profiles were chose for each calibration block samples that made up of 9 profiles that have been measured and the deviation between the measuring values were analyzed. The results shown that the lowest deviation values for most of the profiles are from coordinate measuring machine and Vernier caliper measurement data. Nevertheless, the measurement deviation for laser triangulation 3D scanner are found to be comparable with other equipment.
Keywords: 3D Scanner, Measurement Accuracy. Coordinate Measurement Machine (CMM), Vernier Caliper, Computer Aided Design (CAD).
Scope of the Article: Machine Design.